Start by opening the manage page for your server in mPanel and take note of the LAN IP or Seconday IP(s) you want to configure, then follow the instructions below.

Notes:

  • The gateway address uses the first three parts of the Secondary address being added, and replaces the last number with 1.
  • The netmask on a LAN IP will be 255.255.0.0 and the netmask on Secondary IP(s) 255.255.255.0

Examples:

  • Adding the IP address 103.1.165.254 would use the gateway address 103.1.165.1 and netmask 255.255.255.0
  • Adding the LAN IP address 172.20.165.254 doesn't require a gateway address and would use the netmask 255.255.0.0


Step 1: Open Control Panel and then Network and Sharing Center.


step1


Step 2: Click the 'Manage network connections' link on the left hand side.


step2


Step 3: Right click on 'Local Area Connection' and click 'Properties'.


step3


Step 4: Select 'Internet Protocol Version 4' and click 'Properties'


step4


Step 5: Click 'Advanced'


step5


Step 6: Under the 'IP addresses' section click on 'Add'


step6


Step 7: Enter your additional LAN or Secondary IP and click 'Add'


step7


Step 8: Click 'Ok' on all opened dialogs